Table with epoxy resin inlay and matching lamp

Share
Embed
  • Published on Apr 20, 2017
  • I transformed this ugly duckling table to a nice table with laid in pebbles. The piece of wood that I cut out, I turned into a lamp. I'm very satisfied with the set. In the process I learned a lot about how to handle epoxy.
    I used 2 x 1,2 Watt 12 volt G4 LEDs and a 24 volts 'warm white' LED-strip. The power supply of the lamp is hidden in a special piece of wood I made for the lamp. The steel cables are used for powering the lamp. These steel cables are being sold in a hanging kit, I bought them from a local webshop, www.staalkabelstunter.com/bevestiging/ophangkits/
    I used 15 mm U-shaped aluminium strip. The video starts with the making of it, if you are just interested in the finished result, skip to 7:35.
    Music: Walz of the Flowers by Tchaikovsky
  • Howto & StyleHowto & Style

Comments • 931

  • Mars Boyo
    Mars Boyo 2 days ago

    Kill the music

  • karl bernz
    karl bernz 2 days ago

    no

  • Michael Smith
    Michael Smith 2 days ago

    I remember my first beer

  • The Duckling Homestead and Gardens

    So very imaginative, beautiful and cool!!!! The LED lights look like a trail of hot golden coals spralled out in a line amoung the rocks, like after someone stepped in each place they left hot golden embers behind!! If you want more of a glow maybe try dropping the LEDs down by adding one more and placing back to back and then up against the underside center with the lights facing out sideways, and then adding a reflective surface around the edges of the underside of the rocked area, angled up towards the strips in center of table so the light will reflect off of the reflective surface an back up at the underside of the surface from edge to center. I think that will light the underside up like I think you were expecting and wanted!!
    Wonderful build, I subbed!!!

  • Ольга Кондратьева

    Почему же никто не расскажет о самой эпоксидной смоле? Как выбрать, где купить, как пользоваться, какая она должна быть.

  • 4green fields eire
    4green fields eire 3 days ago

    JUST HAD A FLASH BACK TO MY CHILDHOOD,,,opps , anyone remember the movie with charlton heston,,,SOLENT GREEN........great music ,,onrust, sorry ..carry on

  • Ryan A
    Ryan A 3 days ago

    @ 5:41 what router bit you use?

    • Onrust!
      Onrust!  3 days ago +1

      A standard 45-degree bit with a guiding baring at the bottom.

  • Juliana Oliveira
    Juliana Oliveira 4 days ago

    Ficou linda

  • WAYNES WORLD GAMES LIVE

    What a great idea

    • Onrust!
      Onrust!  4 days ago

      I kinda redid this, but now with circuit boards from old computers in a dining table. What do you think about that? (Soon in this theatre.. 😊)

  • D M
    D M 4 days ago

    Love the look!❤️❤️❤️

  • Crystal Shaman
    Crystal Shaman 5 days ago

    You are brilliant ! 💜

  • Dennis Taft
    Dennis Taft 5 days ago

    you put a lot of time into something that was very disappointing when finished.

    • Onrust!
      Onrust!  5 days ago

      Sounds exactly like this comment of yours.. 😆😆😆😆

  • Philip Johnson
    Philip Johnson 5 days ago

    this project is awesome man! Might I suggest a way to make the LED strip light more evenly thought? Instead of directly placing the LED facing up, it would be better to flip it upside down and make an angled reflection plate to put under it just so slightly.

  • Aleksandra K
    Aleksandra K 5 days ago

    omg amazing

  • Howard Swing
    Howard Swing 6 days ago

    ???????

  • Gabriel Jerônimo
    Gabriel Jerônimo 7 days ago +2

    I liked the music, the other DIY channels are noisy. Amazing job

  • Alex G
    Alex G 9 days ago

    Wow, that's fab for your first go at epoxy and you have such a great sense of humour!

    • Onrust!
      Onrust!  9 days ago

      Thank you. My second go at epoxy was disastrous - soon in this theatre...

  • محمد حسن
    محمد حسن 9 days ago

    Prachtige

  • Gail Jenniffer
    Gail Jenniffer 9 days ago

    I loved watching this video, very clever, and unusual, well done!

  • Archie Bunker
    Archie Bunker 10 days ago

    Meh!

  • Don Shaffer
    Don Shaffer 10 days ago

    Nice

  • Jantonio Ms
    Jantonio Ms 11 days ago

    So ugly

  • Rachel Shemesh
    Rachel Shemesh 12 days ago

    A beautiful project in general, but the way you have chosen to cut it - all the holes, spoiled the beauty of the product . It would have been simpler if you had created a cut in another way.

    • Onrust!
      Onrust!  11 days ago

      I chose this because imho it resembles the outline of stones. Therefore the shape connects with the stones.. (I obviously disagree.. 😆😁 )

  • Maya Zen
    Maya Zen 13 days ago

    Beautiful. I like the idea of the little stones. Would have loved to see some of the flowers you showed us from the tree

  • Z15TEEN
    Z15TEEN 13 days ago

    I Like the stoness theme.

  • Studio Kids
    Studio Kids 13 days ago

    Geweldige klus!

  • tony white
    tony white 16 days ago +1

    Hi, nice work, did you need to blow torch the epoxy to remove air bubbles or was it ok without this process?

    • tony white
      tony white 16 days ago

      @Onrust! Excellent and safer than a blow lamp.

    • Onrust!
      Onrust!  16 days ago +1

      I used a paint stripper. That was very much needed, yes.

  • Antony Gilbey
    Antony Gilbey 19 days ago +2

    Got to have a go at this resin carry on brilliant

    • Onrust!
      Onrust!  19 days ago

      You might like to know that I just put in those green circuit boards that come out of computers in a table, with resin. That is a dining table, though... (wait for the video.. 😆😆 )

  • Robyn Masters
    Robyn Masters 19 days ago

    Oooh. That looks like so much fun. Not to mention a great end results.

  • Patricia Gando
    Patricia Gando 20 days ago

    Es un trabajo maravilloso. Felicitaciones.

  • George Fairley
    George Fairley 21 day ago

    Beautiful

  • Jay Minasi
    Jay Minasi 22 days ago +4

    you picked the perfect music!!

  • canuckyukyuk
    canuckyukyuk 24 days ago

    Loved the table. Hated the lamp. Sorry.

  • Gåd
    Gåd 24 days ago

    This is so ugly in every way

  • Eric Mccabe
    Eric Mccabe 24 days ago

    What a stupid looking table

  • laura sabatini
    laura sabatini 25 days ago

    Dude, you are gifted with an amazing talent. Enjoyed watching you create!

  • Mark vonGermeten
    Mark vonGermeten 25 days ago

    Meh!

  • Justin Chiang
    Justin Chiang 25 days ago

    The break to show us the beautiful Dutch spring time was the best part

  • Sophia Martinez
    Sophia Martinez 26 days ago

    Job well done, so many creative people on the tube.
    I’ve seen another RU-clipr pour a gel like substance on the cracks of tables for cool effect

  • Анна Джарматова

    Классно и идея великолепная

  • Ν Α
    Ν Α 27 days ago

    Great work!!

  • Cody Hess
    Cody Hess 29 days ago

    Beautiful work

  • Ali
    Ali 29 days ago

    Great music and craftsmanship but I dont like the table or light fitting

  • Jay Trader
    Jay Trader 29 days ago

    If I did this to our dining table, my Mum would slap the living shit out of me, tie me to the table, and waterboard me, under that lamp, until I gave up this dude and his instructional video. Sorry Table Guy, I want you to know, I'm gonna hold out as long as I can (my record is 5 seconds during torture), before I rat you and your wonderful channel out.
    My Mum is like Liam Neeson...she may not know who you are, she may not know what you want, but if you ruin her dining table....she will find you, and she will kill you !
    lol. I'm joking. She does have a very peculiar set of special skills though...as do you dude ! Good job ! 😉

    • Onrust!
      Onrust!  28 days ago +1

      You made us smile - those are the best comments! 😊👍 😊👍 Thank you.

  • Sweetie P
    Sweetie P 29 days ago

    Very nice transformation. The only thing that bugged me was the lamp didnt look as tho it could be lowered down and set in place like a puzzle piece in the cut out section . Just me , i wanted it to look alike . But its really beautiful.

    • Onrust!
      Onrust!  28 days ago

      I guess many people find it annoying that I turned it... But I had to, because (as you can see) I drove some screws in the top of the wood, and those holes would have shown if I would have used the wood as if it was to fit in... So I flipped the wood around, but now it won't ever 'fit' again... Sorry.... Thank you.

  • Kitty Kat
    Kitty Kat 29 days ago

    Please tell me how did you learn all these skills? I need to learn

  • 2bucksforthepaper
    2bucksforthepaper 29 days ago

    Turn the lamp around so it maches the hole in the table.

    • Onrust!
      Onrust!  29 days ago

      I guess many people find it annoying that I turned it... But I had to, because (as you can see) I drove some screws in the top of the wood, and those holes would have shown if I would have used the wood as if it was to fit in... So I flipped the wood around, but now it won't ever 'fit' again...
      Sorry...

  • Sternenguckerle yo
    Sternenguckerle yo Month ago

    Hässlich und doch geschmacklos! Kompliment!

  • Norman J. Murk
    Norman J. Murk Month ago

    I'm a carpenter and that was such a cool idea. Many of my customers get rid of old furniture for new stuff after I remodel their houses so what a great idea this would be to reuse some of their old pieces to make new especially when they have sentimental value but they just don't match the new stuff. AWESOME! Thank you for sharing!

  • Romantic Crafter
    Romantic Crafter Month ago

    Wow. A lot of work but worth it.

  • Curt Keeler
    Curt Keeler Month ago +1

    All i can say DAMN THATS SO SWEET..i love it Great job...

  • Jo Jo
    Jo Jo Month ago

    MAGNIFIQUE THANK YOU, GOOD TALENTS

  • rogue24 1
    rogue24 1 Month ago +1

    Looks really bad, ruined good wood there. Very bad design.Why would anyone want to see gravel? Epoxy doesn't make anything look good. 👎

    • Onrust!
      Onrust!  Month ago

      'Why would anyone want to see gravel?' - Just because you don't know the answer to that question doesn't mean that there is no answer... The very essence of what you're saying is that we don't connect. And if we don't connect, then this comment of yours is meaningless. My advice for you would be to stop with these comments.
      Wish you all the best. 👍

  • Michael Craddock
    Michael Craddock Month ago

    Awesome job!

  • Well Discerned
    Well Discerned Month ago

    Very nice

  • Steven Hancock
    Steven Hancock Month ago

    I think the light should have been under the table to shine up through the Rocks would have gave that nice glowing type look.

  • Monique Huismans
    Monique Huismans Month ago

    The music choice was perfect and this an awesome tutorial

  • Rona
    Rona Month ago

    Beautiful work🙏

  • IAmKudzu
    IAmKudzu Month ago

    Looks great. Is it me or is the light hung 180°? Anyway, still very cool.

    • Onrust!
      Onrust!  Month ago +1

      Yes. I had to flip the wood over because at the beginning I put screws in the top. Thank you.

  • Amy Johns wife
    Amy Johns wife Month ago

    This is sooooo beautiful! I'll take a set!

    • Onrust!
      Onrust!  22 days ago

      NC? Where is that? Never heard of. 😊 I'm in AD. You know, AD - NH...? Like in NL?

    • Amy Johns wife
      Amy Johns wife 22 days ago

      Where are you located? I'm in NC.

    • Onrust!
      Onrust!  Month ago +1

      I still got it in my workshop.. let the bidding begin... 😁😁😁😆

  • Kaye Findley
    Kaye Findley Month ago

    Simply Beautiful!!

  • Firewalker 144
    Firewalker 144 Month ago

    Woah. Incredible workmanship. You are a true artist, my friend. Perfect choice of music. Seems to convey your heart about your project. Video and project well as executed. Bravo! 👏👏👏👍❤️

  • Cary Brown
    Cary Brown Month ago

    Very nice project,ingenious,as a matter of fact

  • Amel Khettou
    Amel Khettou Month ago +1

    J'adore 👍👍

  • Willow Brook
    Willow Brook Month ago

    This is a wonderful work.

  • Backroad Diva
    Backroad Diva Month ago

    Wow amazing. Love it

  • Sergio Zamorano
    Sergio Zamorano Month ago

    Que cagada...

  • szaki
    szaki Month ago

    You should've added some fish to the pebbles?

  • Carl Schmiedeke
    Carl Schmiedeke 2 months ago

    I still don't like it

  • Pluma Loca
    Pluma Loca 2 months ago

    Hello.
    How did you secure that the surface of the wood and the surface of the epoxy with pebbles were on th same level?

    • Onrust!
      Onrust!  2 months ago

      I just had to make sure that the table was 100 percent level. That's all..

  • agnieszka s
    agnieszka s 2 months ago

    Stunning!

  • sundar pp
    sundar pp 2 months ago

    innovative ideas with neat finish.great.

  • JackStacks Tv
    JackStacks Tv 2 months ago

    Try using paint tape or Frog tape next time? Maybe idk

    • Onrust!
      Onrust!  2 months ago +1

      Next time I wouldn't use tape, but would sand the epoxy and finish the wood afterwards..

  • Crystal jenkins
    Crystal jenkins 2 months ago

    Holy Hell that is beautiful beautiful😍😍

  • HonuStyleImports
    HonuStyleImports 2 months ago

    Wow! Awesome!

  • Donna Eliza
    Donna Eliza 2 months ago +1

    Those woodwork skills 🤩 Amazing table!

  • Franz Wilson
    Franz Wilson 2 months ago

    que material usa para el centro eso que parece vidrio o cristalizado de las piedras ??

    • Onrust!
      Onrust!  2 months ago

      Epoxy resin - resina epoxica.

  • clayton salvador
    clayton salvador 2 months ago

    omg terrible

  • Ibrahim Alzyadi
    Ibrahim Alzyadi 2 months ago

    Great video! One question though.. can you do the same thing with MDF?

    • Onrust!
      Onrust!  2 months ago

      Thank you! That's an intriguing question.. mmm... MDF... I wouldn't have thought about that. I'm not particular fond of MDF. But I like the question anyway.. 😊 I don't really know, but I think not. I think the epoxy is so thin, that it would run into the MDF, and that would be ugly. But I confess, I don't know. I like these kind of questions, but in this case I would not try it..

  • Cesarin Rural
    Cesarin Rural 2 months ago

    Tanta mamáda para eso

  • Mandarynee
    Mandarynee 3 months ago

    Ouaw, ça fait beaucoup d'époxy..c'est cher l'époxy... Je suis devenue pauvre rien qu'en regardant cette vidéo ^^ Mais le rendu est super !
    C'est très joli. Par contre c'est vrai que s'il y avait plus de rubans de leds ça serait un peu mieux. Et moi j'aurais plutôt fait un miroir avec de la lumière qui sort par derrière avec le morceau en trop. Mais le rendu est très sympa. Un beau travail qui a dû demander beaucoup de temps !

    • Onrust!
      Onrust!  3 months ago +1

      Thank you. Yes the total of epoxy was something like 120 euro (but through RU-clip I earned almost 3.000 from this video.. 😊😁 ). I like the idea of a mirror too..! 👍 Salutations des Pays-Bas, Ron

  • monika fischer
    monika fischer 3 months ago

    Wow 👏👏👏👏👏👏👏👏👏

  • Massimo Mazzoni
    Massimo Mazzoni 3 months ago

    Un ARTISTA 👨‍🎨🤙🏼

  • TheKingDavid
    TheKingDavid 3 months ago

    You said there was a problem with epoxy spilling underneath the table or something but i did not see any problem. What were you talking about?

    • Onrust!
      Onrust!  3 months ago

      No, not really. It turned out OK. But it's a learning process.. 😊 Had I to do it again, I would not first finish the wood, but sand & polish the whole thing, so the epoxy too, afterwards...

    • TheKingDavid
      TheKingDavid 3 months ago

      @Onrust! oh, so it was not that big of a problem after all?

    • Onrust!
      Onrust!  3 months ago

      No, not underneath the table, but underneath the tape I put on at the sides. That tape was useless. I put it on not to let the epoxy get to the already finished wood, but it crawled under. And, as turned out, you can easily wipe the still wet epoxy away, so there really is no need for tape.

  • cameron lawrence
    cameron lawrence 3 months ago +1

    Great Project and Excellent craftsmanship. 💯✔️👍🏾

  • Gruff Tor
    Gruff Tor 3 months ago

    Very nice. 👍👍👍

  • tyler thurman
    tyler thurman 3 months ago

    This is so cool I bet it would be really pretty with little fish in it too

  • JENNY43712
    JENNY43712 3 months ago

    Complimenti fantastico!

  • John T
    John T 3 months ago

    Very unique idea! You mentioned you wouldn't have used the tape, if you could go back, what would you have used? Also, those wires do they go to the cielling? I wonder if making a couple of posts that went through the rocks and fixed under would of been more appealing? I'm assuming you went with batter powered? Would be a pain to run a cord anywhere!

    • John T
      John T 3 months ago

      @Onrust! hey, thanks for the reply. I actually (literally, just did like two minutes ago), just finished cutting a piece of live wood down. I am getting ready to attempt something similar to this, so the feedback is helpful. Thanks again, and I enjoyed the video; very helpful.

    • Onrust!
      Onrust!  3 months ago

      About the tape: I would - as I eventually did - just remove the tape. Mistakenly spilled epoxy you can easily remove when wet. I chose to do it like this because I finished the wood before pouring the epoxy. That meant however, that after pouring the epoxy, I could never touch it again, so no sanding or polishing. And this is the way you learn, because now I would NOT finish the wood, I would have poured the epoxy in excess, and would have sanded and polished the whole afterwards. That way, the epoxy would wind up flatter than it is now.
      The lamp is powered through the hanging wires. That is the cool part... 😊 I made a ceiling piece especially for the lamp - a piece of wood (about the same color) with two hooks to hang the lamp, and I wired the hooks. The required transformer is above the ceiling piece.
      The LED-strip in the table has a transformer of its own, so no batteries. Yes, the wire coming off is a pain. I would certainly think of some battery powered solution for a future project, yes.

  • Lloyd Kenney III
    Lloyd Kenney III 3 months ago

    nice work

  • Matt Que
    Matt Que 3 months ago

    Echt geweldig!!!

  • Sandra Leishman
    Sandra Leishman 3 months ago

    What an amazing idea!

  • sammygolfR32
    sammygolfR32 3 months ago

    8:07 that pebble with a smile

  • eciuj xob
    eciuj xob 3 months ago +1

    Thanks for making me hate this bloody song even more

  • Irene
    Irene 3 months ago

    That turned out beautiful. I'm thinking that table will be pretty heavy with all the stones in it, but it's a stunning look. My good man is interested in doing a project like this, we both love beach combing and have lots of sea shells, pebbles and coloured glass which I think would also work well.

  • Ken Jaermynszki
    Ken Jaermynszki 3 months ago +5

    Table is lovely. Lamp is overkill and detracts from the table. Nice job though.

  • Gerald Martin
    Gerald Martin 3 months ago

    Nicely balanced and well done all around. And don't knock yourself....it couldn't have worked out better.
    Finally...THANK YOU FOR AN OUTSTANDING SOUNDTRACK....!!!!!!

    • Gerald Martin
      Gerald Martin 3 months ago

      @Onrust! Better ? Perhaps yes. But even Michelangelo was never completely satisfied with his work. Perfection is not for man. One's best at the time is admirable and speaks well for its maker.

    • Onrust!
      Onrust!  3 months ago

      Thank you, thank you... Sorry to disagree, but it could have been better - that's the way you learn. Now I would have poured the epoxy and sanded and polished it. The end result would have been slightly flatter and more shiny than it is now...
      Yeah I like Tchaikovsky too... 😊😊

  • Allan Manley
    Allan Manley 3 months ago

    Goed gedaan!

  • Taylor Queensbury
    Taylor Queensbury 3 months ago

    You did a wonderful job, you can compete with the beautiful Dutch scenery.

  • Luciano Ruiz
    Luciano Ruiz 3 months ago

    Horrible!!!!!